We can't find a tongue and groove that wide which leaves us with face nailing. The questions in So let's get to your case of installing a square edged pine floor or hardwood for that manor. If it's the Find this out from a cabinetry shop or a wood flooring company, and make sure your wood starts out this way. If you try to air
I am not familiar with iroko, but I will assume it is hardwood. Some guys will tell you to cut grooves in the board edges and use splines. Splines are little wooden tongues. Some guys will tell you to face nail it, and fill the holes with coloured putty. You don't say if the boards are pre-finished, and this may limit
Tongue and groove edges lock hardwood-flooring planks together along the seams, ensuring a snug fit and hiding finishing nails, but it is possible to install a wood floor without an interlocking
Dec 6, 2017 Wouldn't you like to install 103-year-old close-grained oak pulled from a former New Hampshire school library? Imagine all of those eager little feet scuttling toward their McGuffey's Readers. Gosh, me too! Removing tongue-and-groove hardwood flooring without splintering it is a monumental task.
There are 3 methods used to install wood floors: nail down, glue down & floating. Typically, the flooring is “blind nailed” through the tongue (a portion of the wood plank that protrudes from the board and fits into the groove of the adjacent board). This gives the floor stability without actually fastening it to the subfloor.
Nov 29, 2013 Are you planning to install a new hardwood floor in your home to transform a bedroom, living room, or other space from drab to fab? Among the many crucial aspects of your new floor to consider is whether you'll want to have plank flooring or tongue and groove flooring installed. While both varieties of
My favorite floor-grade softwood is standard 1-by-6 pine in No. 1 and No. 2 grades with tongue-and-groove edges. These grades of wood may have a few knots and other imperfections. The tongue and groove edge allows me to install the boards without any visible nails. If you want a floor that's more rustic and even more
Acclimation of your wood is without a doubt the most important part of installation. The National Most common by today's standards is blind nailing , often used with 2-1/2-inch, tongue-and-groove strip flooring. Wide plank With this method of fastening the nails are concealed in the tongue and groove joint. The tongue
Aug 21, 2006 I don't think I would lay a floor without a tongue and groove but, it's your choice. Tongue and groove can be done . The wood glue, in addition to gluing the individual boards together, had seeped down and glued the oak boards to the plywood subfloor along the seams. In this instance, there was not any