using composite screws in real wood

Drive screws that don't corrode - WOOD Magazine

Lots of screws are labeled appropriate for exterior applications, but only a few hold up to the elements. Among your most-common options are stainless steel (which comes in different grades), silicon bronze, and steel with one of several available coatings. Here, we look at each. Although aluminum and brass resist corrosion, we don't include them because composite decking requires a different thread pattern, as shown above. Traditional-threaded deck screws don't hold well 

Wood Screws, Deck Screws, Composite Screws and Hidden Deck

No more splits in natural wood, mushrooming in composite, with SplitStop screws. No pre-drill or countersink needed. Smooth entry, easy to use on pine, hardwood, composite board, and exotics.

C-Deck Composite Screws The Deck Store Online

The Ultimate Decking screws! Our C-Deck composite Deck screws are for interior and exterior use with wood, composite and other plastic materials. Buy now at The Deck Store Online.

Do You Need Different Deck Fasteners For Different Deck Materials

24 Jul 2011 There are a variety of choices available when it comes to decking material and other Fasteners such as Hex Bolts, Hex Head Cap screws and Nuts and Bolts. Will you build a traditional pressure treated wood deck or opt for the stunning, yet high maintenance look of cedar? Vinyl decking provides a low care and durable deck surface while composite products have the warmth of wood with the strength and longevity of vinyl. But can you use the same deck fasteners for 

The Look of Wood Without the Work - NewTechWood

Eco-Friendly composite: Decking, Siding, Deck Tile, Railing, Bird Feeders When you want the look of real wood, but you don't want the headaches of maintaining that beautiful fa?ade,. NewTechwood solves the problem. NewTechwood with lasts longer, requires less maintenance, and it puts recycled materials to good use creating the natural look of wood . Our solid, square-edge decking installs using composite screws, while all other options employ hidden fasteners for quick,.

Stainless Steel Deck Building Screws & Fasteners DeckWise

They offer an ideal performance with exotic woods and thermally treated wood, PVC and composite decking. These Stainless Steel trim-head deck screws securely fasten decking clips including thermal woods, and composite decking material. The screws' trim-style head is far less obvious with hidden deck fasteners or on a deck surface when face screwing. Meaning, these offer a clean, refined look ensuring a flush installation each time. DeckWise Colormatch screws in three colors.

Wood Screws, Deck Screws, Composite Screws and Hidden Deck

No more splits in natural wood, mushrooming in composite, with SplitStop screws. No pre-drill or countersink needed. Smooth entry, easy to use on pine, hardwood, composite board, and exotics. DeckEase Hidden Deck Fasteners - The Most Versatile Hidden Deck Clip! A Simple, Economical, Versatile and Lifetime Warranted Solution to Hidden Deck Board Fastening.

Decks.com. Hidden Deck Fasteners

Decking can be installed with hidden fasteners to create a clean looking surface that is smooth to bare feet. Hidden fasteners can be used with composite, vinyl, cedar, ipe or other exotic hardwood material. Many manufactured decking materials offer deck boards that are sold with a grooved edge for use with hidden fasteners. You can also router the edges of solid deck boards to create a slot to accept deck clips. It is important to note that pregrooved boards do not have a standard 

Installation - Veranda Composite Decking

To fasten Veranda Solid Decking, we recommend using 2-1/2" corrosion-resistant, composite wood deck screws. These screws help minimize the "mushroom" effect that sometimes occurs when using standard fasteners and will minimize the amount of pre-drilling and countersinking needed. If you are using ordinary, coarse-thread deck screws, it is best to pre-drill a pilot hole and countersink before driving screws. screws 

Friday July 4th Outdoor Wood - Make It Right?

4 Jul 2014 If money isn't an issue your best bet is to use stainless steel fasteners, but a close second (and a less expensive alternative) are vinyl-coated “green” wood/deck screws. These are PT lumber and cedar will fade as well—even more so than composite—but people tend to be harder on composite wood because it is a manufactured product. It can be textured to look like real wood, and different types are resistant to UV, fading, stains, insects, splitting and/or warping.

Working with Seventrust & Composite Decking - HomeTips

6 Apr 2016 Expert advice on how to install and work with TREX and other composite decking materials, how to cut and fasten TREX, and framing for composite decking. Solid “boards” are simpler to deal with, but heavy, hollow types are lighter but fussier to install. Some composites look like real wood—at Though common wood screws might seem like they would work as well, they tend to “mushroom,” or bore out the holes rather than set into the material. composite deck 

Important Instructions for Important Instructions for - SplitStop screws

of composite decking and wood framing requires slight changes in installation methods which you should be most aware of as you proceed with your plans for a new composite deck. We recommend that you read the information below and pay special attention to the guidance provided in the Expansion/Contraction/Shrinkage section. Screw sizes recommended for different board thicknesses: 1-1/2" Length screws - *3/4" (or less) Solid Deck Boards (*Not recommended for the 

Frequently Asked Questions - Veranda Composite Decking

VERANDA? composite decking and railing offers the natural look of wood without the ongoing maintenance. x 6" size. The actual dimensions are: 0.94" thick by 5.25" wide, which is approximately 15/16" x 5-1/4" in fractional measurements. Veranda High-Performance and Tropics Decking measure 5-1/4" x 15/16". Additional railing components include a 48" post sleeve, 6' and 8' handrail, 35-1/4" balusters, post caps and colour coordinating hardware kits with stainless steel screws.

Choosing the best screws What kind of screw to use

25 Mar 2016 screws form strong connections between parts made from solid wood, plywood and other sheet goods without the need for cut joinery. From heads to drives, Choosing the right wood screw used to be simple pick a zinc or brass screw with the right size and length for the job at hand. But technological .. Starborn's HEADCOTE? stainless-steel screws have heads colored to match commonly used decking lumber as well as PVC and composite materials. 3. Reduce 

SplitStop Star Drive Composite Screw Products - SplitStop screws

No countersinking or pre-drill needed, no more mushrooming effect, with Splitstop composite deck screws. Star Drive composite screws. Two unique composite screw choices, specially designed to meet the complex issues surrounding the fastening of varying types of composite (plastic/wood) decking to a wood joist structure. Both feature our ACQ Rated finish, specifically designed Important information Regarding the installation of composite Decking using composite screws.